Post a Reply
1081 views

Multiple servers not working

  1. 15 years ago

    jrecho

    15 Sep 2009

    I have setup the servers on 2 servers FOP2 and it is working on each server individually.

    I have telnet to both servers from one to the other on port 5068 and 4445 and they work
    I am looking at your instructions on http://www.fop2.com/documentation-confi ... Parameters
    in which you are talkging about the server and its buttons but I was not sure I understood what you said in the last 2 line

    "Later, on the button definition, you might want to specify the server. If you do not specify the server in the button definition it will try to match the device on any of the servers."

    snipit from buttons.cfg
    For the local extension

    [SIP/100]
    type=extension
    extension=100
    label=Mr casa
    mailbox=100@default
    context=from-internal
    extenvoicemail=*100@default

    For a remote extension

    [SIP/162]
    type=extension
    extension=100
    label=Mr rabat
    mailbox=162@default
    context=from-internal
    extenvoicemail=*162@default

    But when I setup the buttons I set them up just like I did on my local server if this wrong please advise here is a snipit from fop2.cfg

    Server connection
    ; Casa
    manager_host=xxxx
    manager_port=5038
    manager_user=xxxx
    manager_secret=xxxxxx
    ;event_mask=call,agent

    ;Rabat
    manager_host=xx.xx.xx.xx
    manager_port=5038
    manager_user=xxx
    manager_secret=xxxxx

    The button do show up in green but I see no events nothing when I click on them I can not listen

    Please advise

  2. admin

    15 Sep 2009 Administrator

    Hi,

    As we talked yesterday, start fop2_server with debug level of 1 (./fop2_server -X 1) and look for the manager events from BOTH servers. You should see events for BOTH. If you do not see event for one, or see a connection denied, or maybe a connection timeout, you won't see any status updates and a button in green.

    If the channel name is correct, and you are getting events from the 2nd , or 3rd servers (for fop2 is the same), you will see activity.

    So, start fop2_server with debug level 1 and look and inspect the events and try to find any issues there.

    Regards,

  3. jrecho

    16 Sep 2009

    give me the command please to start it in debug mode

  4. admin

    16 Sep 2009 Administrator 
    service fop2 stop
cd /usr/local/fop2
./fop2_server -X 3

  5. jrecho

    16 Sep 2009

    That helped a great deal thak you I found the problem and corrected it now all is working.

    Thank you so much Nicolas you are the best.

    Should I now upgrade to the betta version ???

or Sign Up to reply!