I have installed 3 trixbox Ce servers across 3 sites connected via an IAX trunk and have been using fop2 on one site.
I am now able to monitor the individual extensions. I must mention that I had to add a permit IP to
etc/asterisk/manager.conf for this to work.

My problem is seeing which trunk is online.. I am getting all sorts of wrong information on fop2 when calling the remote extensions on the IAX trunk . Through the main PRI at Head Office , I sometimes get the fop2 displaying a remote trunk for instance.

I know my problem is that should specify ( at least for the trunks) the individual servers . How do I specify the particular server on the buttons.cfg ??

This is my fop2.cfg

[general]
; AMI definitions
manager_host=127.0.0.1
manager_port=5038
manager_user=admin
manager_secret=amp111
;event_mask=call,agent

; Server 2
manager_host = 192.168.32.5
manager_port = 5038
manager_user = admin
manager_secret = amp111
;event_mask=call,agent

; Server 3
manager_host = 192.168.64.5
manager_port = 5038
manager_user = admin
manager_secret = amp111
;event_mask=call,agent

And a remote trixbox /etc/asterisk/manager.conf

;
; Asterisk Call Management support
;
[general]
enabled = yes
port = 5038
bindaddr = 127.0.0.1

[admin]
secret = amp111
deny=0.0.0.0/0.0.0.0
permit=192.168.0.5
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user

So if each of my locations has Aastra phones which are automatically named phone-aastra-1, phone-aastra-2, etc I would have to rename the phones at all but one location in order to use one FOP2 interface to view and manage all locations, correct? If location A has phone-aastra-1 and so does location B this isn't going to work even if a line is added in the button configuration to specify what server to associate that button with.