I am running FOP 2.2 against asterisk 1.6.2.3 managed by FreePBX 2.8.0.2.
After running for a while, with not much usage as we are only testing at present, the dialbox has stopped working completely. I can successfully originate a call by selecting an extension, then clicking on the Dial button. If I enter the same extension into the dialbox and hit ENTER, nothing happens.
Below is an excerpt of the output from the fop2_server at debuglevel 15 when using the Dial button:
10.0.28.248 <= <msg data="6|originate|8|3779e1ed97121b000bd42c3d75ced8b4" />
127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: SIP/14502
127.0.0.1 -> Exten: 4008
127.0.0.1 -> Context: from-internal
127.0.0.1 -> Priority: 1
127.0.0.1 -> CallerID: Reception 1 <4006>
127.0.0.1 -> Async: True127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Originate successfully queued
127.0.0.1 <- Server: 0.....
10.0.28.248 => { 'btn': '6@GENERAL', 'cmd': 'settimer', 'data': '0@UP', 'slot': '1' }
10.0.28.248 => { 'btn': '6@GENERAL', 'cmd': 'state', 'data': 'RINGING', 'slot': '1' }
10.0.28.248 => { 'btn': '6@GENERAL', 'cmd': 'settext', 'data': '4006 Reception 1', 'slot': '1' }
And when using the dialbox:
10.0.28.248 <= <msg data="6|dial|4008|3779e1ed97121b000bd42c3d75ced8b4" />
The above line is the only output when using the dialbox, so it seems that the dial message is being silently dropped. I have checked the various asterisk settings - callevents=yes, read/write=all, event_mask commented out.
Thanks.
