Hi fop2 team,

This is my first setup and use of fop2. Until now everything works fine, except I can not transfer a call to the Parking Lot. Everything is configured properly. To transfer my active call I have selected the Park button and then clicked the Transfer action button in the toolbar but nothing happened. Using the debug I was not able to see transfer action, just this message

Flash clients connected: 1
--------------------------------------------------------------------------------------------------
Client 192.168.xxx.xxx:53805 , user: 502@GENERAL, type: xmlsocket (AnyEvent::Handle=HASH(0x6336b70))
--------------------------------------------------------------------------------------------------

192.168.xxx.xxx:53805 <= <msg data="4|blindxfer|6|e84f05a3625a89387cf44610f2c27f88" ></msg>

Additionally, sip conf is configured with callevents=yes and read and write permissions are set to all. I am using Centos 6.5, Asterisk 11.13.0 and fop2 2.30.00.

I would appreciate any hints.

Kind regards

Hi admin,

I ran server in debug mode, tried to transfer a call to parking lot, but nothing happened. Here is my output:

192.168.15.112:57534 <= <msg data="4|blindxfer|6|b5601bead2d59b50ba313f6e77d3f535" ></msg>

Flash clients connected: 2
--------------------------------------------------------------------------------------------------
Client 192.168.15.112:57534, user: 502@GENERAL, type: websocket (AnyEvent::Handle=HASH(0x12902e60))
Client 192.168.15.112:57332, user: 502@GENERAL, type: websocket (AnyEvent::Handle=HASH(0x11b161d0))
--------------------------------------------------------------------------------------------------

127.0.0.1 -> Action: Ping

127.0.0.1 <- Response: Success
127.0.0.1 <- Ping: Pong
127.0.0.1 <- Timestamp: 1446820936.470587

127.0.0.1 <- Event: HangupRequest
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: SIP/302-00000003
127.0.0.1 <- Uniqueid: 1446820906.3

127.0.0.1 <- Event: Bridge
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Bridgestate: Unlink
127.0.0.1 <- Bridgetype: core
127.0.0.1 <- Channel1: SIP/502-00000002
127.0.0.1 <- Channel2: SIP/302-00000003
127.0.0.1 <- Uniqueid1: 1446820906.2
127.0.0.1 <- Uniqueid2: 1446820906.3
127.0.0.1 <- CallerID1: 502
127.0.0.1 <- CallerID2: 302

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: dialplan,all
127.0.0.1 <- Channel: SIP/502-00000002
127.0.0.1 <- Context: macro-dial-one
127.0.0.1 <- Extension: h
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: hangupcall,
127.0.0.1 <- Uniqueid: 1446820906.2

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: dialplan,all
127.0.0.1 <- Channel: SIP/502-00000002
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?endmixmoncheck
127.0.0.1 <- Uniqueid: 1446820906.2

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: dialplan,all
127.0.0.1 <- Channel: SIP/502-00000002
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 9
127.0.0.1 <- Application: NoOp
127.0.0.1 <- AppData: End of MIXMON check
127.0.0.1 <- Uniqueid: 1446820906.2

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: dialplan,all
127.0.0.1 <- Channel: SIP/502-00000002
127.0.0.1 <- Context: macro-hangupcall
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 10
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?nomeetmemon
127.0.0.1 <- Uniqueid: 1446820906.2

Edited...

Exiting...

Thank you for the support

Hi admin,

I ran debug using following commands:

service fop2 stop
cd /usr/local/fop2
script capture.log
./fop2_server -X 511

Then I establish call between two extensions (502 and 302), logged into the fop panel using credentials from 502 extension and tried to transfer a call to the parking lot, but nothing happened. Please find attached my debug file.

Thank you,
Kind regards

I inspected autoconfig-buttons.sh but pattern park was not found there. Then I inspected autoconfig-buttons-freepbx.sh and I found:

#PARKSLOT=`/usr/sbin/asterisk -rx "dialplan show parkedcalls" | grep "=>" | cut -d= -f1 | sed s/\'//g | sed 's/ //g'`
#if [ "X${PARKSLOT}" != "X" ]; then
#echo
#echo "[PARK/default]"
#echo "extension=${PARKSLOT}"
#echo "context=parkedcalls"
#echo "type=park"
#echo "Label=Park ${PARKSLOT}"
#echo
#fi

Hi admin,

Here is my output from /usr/local/fop2/autoconfig-buttons.sh (Last time I did vi autoconfig-buttons.sh instead of executing it, sorry my mistake)

[PARK/default]
type=park
label=Default Lot
context=parkedcalls
autoanswerheader=__SIPADDHEADER51=Call-Info=answer-after=0.001

Thx

No I have never changed anything after installation (I just execute command /usr/local/fop2/generate_override_contexts.pl -write).

I have installed fop2 using official installation documentation from this webiste. I have Centos 6.5, Asterisk 13.0 and Elastix 2.5.

Here are all located fop2 direcotries:

/etc/sysconfig/fop2
/etc/rc.d/init.d/fop2
/usr/src/fop2
/usr/local/fop2
/var/www/html/fop2

I found #excec line just in /usr/local/fop2/fop2.cfg and it says:

#exec autoconfig-users.sh

Also I am able to see park default button from interface, as shown in attached picture.