Post a Reply
3377 views

DAHDI Trunk Status not showing

  1. 11 years ago

    Pete123

    4 Oct 2013

    Hi,

    I'm using FreePBX 2.11 and FOP2 + the FreePBX Admin Module, but what ever I do I just can't get my DAHDI trunk status to show up - it never changes from the normal green status with no info.

    I have tried many different combinations of the trunk number and name in the trunks channel box in the admin module, but all to no effect.

    Doing a Core show channels gives: DAHDI/1-1

    Please could someone advise the exact syntax of what I should put in the channels box?

    Thanks very much,

    Peter.

  2. admin

    4 Oct 2013 Administrator

    you should set up a channel range like 1-10, the easiest way to check what fop2 will see is to run the script

    /usr/local/fop2/autoconfig-buttons-freepbx.sh

    Inspect the output for your trunk buttons, what do you see as the channel in brackets and also the channel headers?

  3. Pete123

    15 Oct 2013

    Hi,

    Thanks very much for your reply and sorry that I have not replied sooner.

    I ran the script and go the output below relating to DAHDI

    Thanks,

    Peter.

    [DAHDI/g0]
    type=trunk
    label=DAHDI/g0
    queuecontext=from-internal
    privacy=none
    email=splitme-1-1
    channel=DAHDI/i1
    channel=ZAP/1
    rtmp=0

    [DAHDI/1]
    type=trunk
    label=DAHDI
    channel=DAHDI/1-1
    channel=DAHDI/1-2
    channel=DAHDI/1-3

  4. Pete123

    16 Oct 2013

    Hi,

    Thanks for the reply and sorry for not replying sooner.

    Running the script produces output relating to DAHDI below:

    Kind Regards,

    Peter.

    [DAHDI/g0]
    type=trunk
    label=DAHDI/g0
    queuecontext=from-internal
    privacy=none
    email=splitme-1-1
    channel=DAHDI/i1
    channel=ZAP/1
    rtmp=0

    [DAHDI/1]
    type=trunk
    label=DAHDI
    channel=DAHDI/1-1
    channel=DAHDI/1-2
    channel=DAHDI/1-3

  5. admin

    28 Oct 2013 Administrator

    Maybe your DAHDI channels are prefixed with an "i" for interface. The latest autoconfig scripts already include that name, if you have an older autoconfig script, you can modify it and add the line that outputs DAHDI/ix:

    Edit the autoconfig-buttons-freepbx.sh script and look for something similar to this:

    do
echo "channel=DAHDI/$ZAPNUM"
echo "channel=ZAP/$ZAPNUM"
done

    and change it to this:

    do
echo "channel=DAHDI/$ZAPNUM"
echo "channel=DAHDI/i$ZAPNUM"
echo "channel=ZAP/$ZAPNUM"
done

    Finally restart fop2.

  6. Pete123

    29 Oct 2013

    Thanks very much that's fixed it !

    My autoconfig-buttons-freepbx.sh script only had:

    do
    echo "channel=DAHDI/i$ZAPNUM"
    echo "channel=ZAP/$ZAPNUM"
    done

    So I actually added:


    echo "channel=DAHDI/$ZAPNUM"

    And that seems to have fixed it!

    Thanks so much for your help.

    Kind Regards,

    Peter.

or Sign Up to reply!